Radial circuit
Contents |
[edit] Introduction
A radial circuit is a type of fixed wiring that feeds one piece of suitable cable from one power point to another. It continues in this fashion until it reaches the last point on the circuit and does not return back to the consumer unit or power source.
This type of linear power circuit is commonly used to wire household equipment such as cookers and boilers, lighting points and sockets. It is relatively easy to locate the fault in this type of circuit, since the arrangement is linear.
[edit] Socket example
A socket might be wired with a radial circuit that starts at the consumer unit and runs to all the subsequent sockets down the line. Each socket takes its power from the one before it. This is repeated until the end of the run, where the wiring sequence terminates.
While a radial circuit creates a linear chain, it is also possible to create branches to the chain through properly configured splits. Additional guidance for radial circuits can be found in BS 7671:2018+A1:2020, Requirements for Electrical Installations. IET Wiring Regulations.
[edit] Radial vs ring circuits
Like ring circuits, radial circuits are often used in UK households. However, ring circuits tend to be more frequently used in the UK while radial circuits are more common in other countries. This may be due to the added flexibility of ring circuits for the connection of different types of equipment. Ring circuits also tend to use less copper than radial circuits.
For more information see: Ring circuit.
[edit] Related articles on Designing Buildings Wiki
- Consumer unit.
- Electricity.
- Modular housing and electrical circuitry.
- Ring circuit.
- What to know about foundation earthing.
[edit] External resources
Featured articles and news
Call for greater recognition of professional standards
Chartered bodies representing more than 1.5 million individuals have written to the UK Government.
Cutting carbon, cost and risk in estate management
Lessons from Cardiff Met’s “Halve the Half” initiative.
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.
UKCW London to tackle sector’s most pressing issues
AI and skills development, ecology and the environment, policy and planning and more.
Managing building safety risks
Across an existing residential portfolio; a client's perspective.
ECA support for Gate Safe’s Safe School Gates Campaign.
Core construction skills explained
Preparing for a career in construction.
Retrofitting for resilience with the Leicester Resilience Hub
Community-serving facilities, enhanced as support and essential services for climate-related disruptions.
Some of the articles relating to water, here to browse. Any missing?
Recognisable Gothic characters, designed to dramatically spout water away from buildings.
A case study and a warning to would-be developers
Creating four dwellings... after half a century of doing this job, why, oh why, is it so difficult?
Reform of the fire engineering profession
Fire Engineers Advisory Panel: Authoritative Statement, reactions and next steps.
Restoration and renewal of the Palace of Westminster
A complex project of cultural significance from full decant to EMI, opportunities and a potential a way forward.
Apprenticeships and the responsibility we share
Perspectives from the CIOB President as National Apprentice Week comes to a close.
The first line of defence against rain, wind and snow.
Building Safety recap January, 2026
What we missed at the end of last year, and at the start of this.